The 918AC System Interface is an AC-powered console designed to monitor 1 to 4 simple input switch devices and provide both audible and visual indication when an input switch is activated. In addition, the 918AC has the optional capability to add 1 to 4 configurable relay outputs to interface with remote audible and visual indicators or other external simple switch-activated devices.

• Audible alarm ON/OFF selectable by channel
• Auto silence ON/OFF selectable by channel
• Normally open (NO) or normally closed (NC) selectable on input and output
• Output relay activation selectable to one or more input channels
• Fail safe mode selectable to indicate power outage at console

Internal dispenser interface module, dispenser interface cable must be ordered separately

The FMP-HIS Hydrostatic Interstitial Briteâ„¢ sensor detects leaks in double wall tanks where the interstitial space is filled with a liquid brine solution. For use with all Tank Sentinel ® and fuel management systems, the FMP-HIS polyester, Nitrile, and epoxy construction is compatible with all types of brine.

•Versatile sensor for virtually all fiberglass double wall tanks equipped for hydrostatic leak detection.
•Microcomputer monitors liquid at varying levels within tanks and relays digitally encoded status information via the fail-safe Briteâ„¢ sensor digital communication system to fuel management system or Tank Sentinel® ATGs, alerting of any alarm conditions.

The FMP-HIS Hydrostatic Interstitial Briteâ„¢ sensor detects leaks in double wall tanks where the interstitial space is filled with a liquid brine solution. For use with all Tank Sentinel® and fuel management systems, the FMP-HIS polyester, Nitrile, and epoxy construction is compatible with all types of brine.

•Versatile sensor for virtually all fiberglass double wall tanks equipped for hydrostatic leak detection.
•Microcomputer monitors liquid at varying levels within tanks and relays digitally encoded status information via the fail-safe Briteâ„¢ sensor digital communication system to fuel management system or Tank Sentinel® ATGs, alerting of any alarm conditions.

INCON® brand digital inventory and leak detection probes provide accurate tank level monitoring and reporting with optional leak detection capabilities. These probes employ digital magnetostrictive position measurement technology for highly accurate tank readings.

The liquid sensor (ULS) is a low cost sensor which may be used with all EVOâ„¢ Series fuel management systems. This sensor is also compatible with S940 Sensor Alarm Console. Based on float-switch technology and made of chemically-resistant materials, the ULS may be installed in sumps, dispenser pans, steel double wall tanks or other locations where the presence of liquid indicates a leak has occurred.The FMP-ULS is a standard sensor that is used to detect the presence of a liquid in the normally dry Class 1, Division 1, Group D Hazardous Areas: sumps, dispenser-pans, and interstitial areas of double-wall, steel storage tanks. The sensor is supplied with electrical connectors, 25 feet of cable, and a cord-grip fitting. The FMP-ULS uses magnetic-float/reed-switch technology. (The sensor must be suspended vertically, so the float can rise freely with the level of a liquid.)

• Highly reliable float technology and closed output circuit ensures that leaks are detected.
• Chemical-resistant materials assure compatibility with most liquids.

OMNTEC sensors are most known for their ease of installation, reliability, cost-effectiveness and remote testability. Electro-optic technology provides accurate and continuous monitoring. Ruggedly constructed, these solid-state sensors are UL listed and Third-party certified. A distinguishing feature of OMNTEC sensors is that they can be tested remotely with the press of a single button.

The L-series sensors are designed to provide product-level alarms for high, caution or low product levels. L-series sensors can be remotely tested without removal. This sensor is available with multiple alarm points.

The L-1-L is a 20 inch single alarm point level sensor.

OMNTEC sensors are most known for their ease of installation, reliability, cost-effectiveness and remote testability. Electro-optic technology provides accurate and continuous monitoring. Ruggedly constructed, these solid-state sensors are UL listed and Third-party certified. A distinguishing feature of OMNTEC sensors is that they can be tested remotely with the press of a single button.

The L-series sensors are designed to provide product-level alarms for high, caution or low product levels. L-series sensors can be remotely tested without removal. This sensor is available with multiple alarm points.

The L-1-S is a 12 inch single alarm point level sensor.

BX-LF series float sensors have multiple options including material of construction, mountings and float sizes. This allows for the BX-LF sensor to be extremely versatile in a wide range of applications such as water, oils, chemicals and corrosive liquid.

OMNTEC sensors are most known for their ease of installation, reliability, cost-effectiveness and remote testability. Electro-optic technology provides accurate and continuous monitoring. Ruggedly constructed, these solid-state sensors are UL listed and Third-party certified. A distinguishing feature of OMNTEC sensors is that they can be tested remotely with the press of a single button.

The LS-ASC non-distinguishing sensor was designed to accommodate a variety of applications. With its convenient size and ability to detect liquids at any angle, the LS-ASC sensor is the ideal sensor for sumps, dispenser pans, containment areas and annular spaces of double-wall steel tanks.