The OPW 21Gu Series DEF Hose is the de facto standard for hoses in Europe. Designed with integral swivel couplings and an anti-kinking sleeve, the 21Gu hose is easy to install and use. The OPW 21Gu Hose meets compatibility testing as specified in ISO 22241 so that you can rest assured that your hose will last. Lightweight and highly flexible for easy customer handling.

• Specially designed for DEF-flow applications
• Lightweight and highly flexible for easy customer handling
• Smooth bore, seamless fluoropolymer lining for exceptional flow performance
• Swivel end couplings provide for easy installation
• Durable, reliable, long-life performance and maximum flow efficiency
• Anti-kinking sleeve at nozzle end to reduce wear on hose during use

66H Series Hoses are Third-Party approved, steel reinforced hardwall flexible to -40°F. 3/4 inch inside diameter with 3/4 inch male NPT chrome crimped ends. Compatible with fuel blends up to E-15 & B-20. Maximum working pressure 50PSI. Also available in Low Permeation per Third-Party approval.

66H Series Hoses are Third-Party approved, steel reinforced hardwall flexible to -40°F. 3/4 inch inside diameter with 3/4 inch male NPT chrome crimped ends. Compatible with fuel blends up to E-15 & B-20. Maximum working pressure 50PSI. Also available in Low Permeation per Third-Party approval. Straightening Hose low permeation per Third-Party approval.

66H Series Hoses are Third-Party approved, steel reinforced hardwall flexible to -40°F. 3/4 inch inside diameter with 3/4 inch male NPT chrome crimped ends. Compatible with fuel blends up to E-15 & B-20. Maximum working pressure 50PSI. Also available in Low Permeation per Third-Party approval.

Manufactured with a swivel on each end to provide the ease of handling customers prefer. Inverted coaxial design reduces hose size and the steel braided, premium, abuse-resistant outer hose assures long service life and low maintenance. Available in up to 20' lengths.

Fixed end on breakaway end, balance swivel end on dispenser end

Fixed end on breakaway end, balance swivel end on dispenser end

Use the OPW quick and easy ConVRsion package when converting or decommissioning your Stage II Vapor Recovery System. Includes: 11B 3/4" nozzle, 241TPS-0241 3/4" 2-plane swivel, 66H-0975 Standard or 66H-0975-LP Low Permeation 3/4" whip hose/9" long 3/4" NPT, 68EZR-7575 3/4" Reconnectable Breakaway, 66H-08575 Standard or 66H-08575-LP Low Permeation 3/4" Hose, 8-1/2" feet long, 3/4" NPT, F FILLGARDâ?¢ Splash Guard - Color will match Hand Insulator

Use the OPW quick and easy ConVRsion package when converting or decommissioning your Stage II Vapor Recovery System. Includes: 11B 3/4" nozzle, 241TPS-0241 3/4" 2-plane swivel, 66H-0975 Standard or 66H-0975-LP Low Permeation 3/4" whip hose/9" long 3/4" NPT, 68EZR-7575 3/4" Reconnectable Breakaway, 66H-08575 Standard or 66H-08575-LP Low Permeation 3/4" Hose, 8-1/2" feet long, 3/4" NPT, F FILLGARDâ?¢ Splash Guard - Color will match Hand Insulator

VSTaflexâ„¢ Curb Pump Hose is designed for gasoline and diesel blended fuels at dispensing pump applications. VSTaflex Hose uses synthetic rubber blends exactingly formulated by VST for excellent fuel, ozone, UV, aging, and abrasion resistance. They offer superior handling and increased service life.

Customer Benefits: Light weight assembly, easy to handle, eliminates potential leak points, and low cost of ownership.

Built in Variable Flow Limiter: Variable spring-loaded design allows flow rates up to 10 GPM without exceeding the federally mandated legal limit. Only activates when needed so as not to exceed the 10 GPM flow rate. Eliminates nozzle shutoff problems due to exceeding 10 GPM flow limit. Engineered to operate inside the whip hose, thereby reducing the assembly weight, end connections, and overall cost of ownership.

Product Specification: These products are NOT recommended where components are exposed to contact with fuels containing more than 5% methanol, 10% ethanol, 15% MTBE by volume, any exposure to M85/E85, other alcohol rich fuels, or more than 20% bio-diesel style fuels.

UL 330 Listed Hose Assemblies.

VSTaflexâ„¢ Curb Pump Hose is designed for gasoline and diesel blended fuels at dispensing pump applications. VSTaflex Hose uses synthetic rubber blends exactingly formulated by VST for excellent fuel, ozone, UV, aging, and abrasion resistance. They offer superior handling and increased service life.

Customer Benefits: Light weight assembly, easy to handle, eliminates potential leak points, and low cost of ownership.

Built in Variable Flow Limiter: Variable spring-loaded design allows flow rates up to 10 GPM without exceeding the federally mandated legal limit. Only activates when needed so as not to exceed the 10 GPM flow rate. Eliminates nozzle shutoff problems due to exceeding 10 GPM flow limit. Engineered to operate inside the whip hose, thereby reducing the assembly weight, end connections, and overall cost of ownership.

Product Specification: These products are NOT recommended where components are exposed to contact with fuels containing more than 5% methanol, 10% ethanol, 15% MTBE by volume, any exposure to M85/E85, other alcohol rich fuels, or more than 20% bio-diesel style fuels.

UL 330 Listed Hose Assemblies.

VSTaflexâ„¢ Curb Pump Hose is designed for gasoline and diesel blended fuels at dispensing pump applications. VSTaflex Hose uses synthetic rubber blends exactingly formulated by VST for excellent fuel, ozone, UV, aging, and abrasion resistance. They offer superior handling and increased service life.

Customer Benefits: Light weight assembly, easy to handle, eliminates potential leak points, and low cost of ownership.

Built in Variable Flow Limiter: Variable spring-loaded design allows flow rates up to 10 GPM without exceeding the federally mandated legal limit. Only activates when needed so as not to exceed the 10 GPM flow rate. Eliminates nozzle shutoff problems due to exceeding 10 GPM flow limit. Engineered to operate inside the whip hose, thereby reducing the assembly weight, end connections, and overall cost of ownership.

Product Specification: These products are NOT recommended where components are exposed to contact with fuels containing more than 5% methanol, 10% ethanol, 15% MTBE by volume, any exposure to M85/E85, other alcohol rich fuels, or more than 20% bio-diesel style fuels.

UL 330 Listed Hose Assemblies.