HANGING HARDWARE

 Clamp 
 Hoses 

SHOWING ITEMS 61 - 72 OF 166 RESULTS
view_module view_list
66H-0975
66H Series Hoses are Third-Party approved, steel reinforced hardwall flexible to -40F. 3/4 inch inside diameter with 3/4 inch male NPT chrome crimped ends. Compatible with fuel blends up to E-15 & B-20. Maximum working pressure 50PSI. Also available in Low Permeation per Third-Party approval.
$ 31.23
66H-0975-LP
66H Series Hoses are Third-Party approved, steel reinforced hardwall flexible to -40°F. 3/4 inch inside diameter with 3/4 inch male NPT chrome crimped ends. Compatible with fuel blends up to E-15 & B-20. Maximum working pressure 50PSI. Also available in Low Permeation per Third-Party approval. Straightening Hose low permeation per Third-Party approval.
$ 59.88
66H-1300
66H Series Hoses are Third-Party approved, steel reinforced hardwall flexible to -40F. 3/4 inch inside diameter with 3/4 inch male NPT chrome crimped ends. Compatible with fuel blends up to E-15 & B-20. Maximum working pressure 50PSI. Also available in Low Permeation per Third-Party approval.
$ 48.74
66REC-1000
The OPW 66REC is the first dry reconnectable breakaway for the conventional dispensing market. It is designed to be installed on fuel dispensing hoses and will separate when subjected to a designated pull force. The dual valves seat automatically, stopping the flow of fuel and limiting any fuel spillage, while protecting the dispensing equipment. When reconnecting the separated halves, the 66REC seals tightly on an O-ring before the poppet stems engage to open the valve. For proper operation on high-hanging hoses, the OPW 66REC 3/4" must always be installed with a "straightening" hose with a minimum length of 9", such as the OPW 66H. For low hose applications, the OPW 66REC should be installed downstream of the retractor cable.

• UL and ULC listed for use in gasoline, diesel, and up to 10% ethanol blends
• Pull Force – the 66REC-1000 will break away with a pull force of no more than 350 lbs
• Unique Double-Poppet Design – features low pressure drop
• Coupling Halves – protected by proven plastic sleeves.
• Easily reconnected - just "push and twist" until you hear the audible click, signifying the unit has been correctly reconnected. Reconnection force approximately 15 lbs
• May be reconnected under wet or dry hose conditions
• Cold weather compatible
• Line Shock - the OPW 66REC is able to absorb the effects of normal line shock through the unique design of the disconnecting features
$ 73.18
66SB-1010
The OPW 66SB Swivel Breakaway is intended for easy installation at the nozzle inlet. The compact, lightweight design incorporates a 360° swivel rotation at both the male end and middle joint, with a simple and easily-reconnectable breakaway on the opposite end.

• UL and ULC listed for use in gasoline, diesel and up to 10% ethanol blends
• Pull Force - the 66SB will break away with a pull force of no more than 350 lbs
• Easily Reconnected at Waist Height - after relieving line pressure, simply push coupling halves together until latched. Reconnection force is approximately 15 lbs
• Protected Coupling and Poppet - the breakaway's poppet and sealing surface are protected from impact during separation by a plastic sleeve
• Reduces Connections - the single-unit design replaces the standard swivel, breakaway and whip hose, eliminating possible leak points
• Double O-Ring Seal - both swivel joints are protected by a double O-Ring design
$ 154.13
66V-0300
The OPW 66V Series breakaways are designed and rigorously tested for use in today's fuels. Installed on fuel dispensing hoses, they will separate at the designed pull force, reducing expensive damage to the dispenser and piping system. Internal dual valves close automatically during separation stopping the flow of fuel from both the dispenser and the separated hose, reducing environmental and health risks of potential spilled fuel.

• UL and ULC listed for use in gasoline, diesel, and up to 10% ethanol blends
• Prevents costly damage to dispensers – Pulls apart at less the designed pull force during drive-offs
• Certainty of operation – Designed for single use, so you know it is replaced instead of re-assembled
• Prevents hazardous and costly clean up – Unique double poppet design closes leak path from both dispenser and separated hose side
$ 35.32
66V-1300
The OPW 66V Series breakaways are designed and rigorously tested for use in today's fuels. Installed on fuel dispensing hoses, they will separate at the designed pull force, reducing expensive damage to the dispenser and piping system. Internal dual valves close automatically during separation stopping the flow of fuel from both the dispenser and the separated hose, reducing environmental and health risks of potential spilled fuel.

• UL and ULC listed for use in gasoline, diesel, and up to 10% ethanol blends
• Prevents costly damage to dispensers – Pulls apart at less the designed pull force during drive-offs
• Certainty of operation – Designed for single use, so you know it is replaced instead of re-assembled
• Prevents hazardous and costly clean up – Unique double poppet design closes leak path from both dispenser and separated hose side
$ 81.09
68EZR-7575
The OPW 68EZR Reconnectable Breakaway has been designed for retail fueling operations to deliver an increased level of security in the event of a drive off. Not only is it the fastest and easiest breakaway in the industry to reconnect, but also the one that delivers the greatest peace of mind that it is securely reconnected. Built on the 66REC breakaway technology platform, the 68EZR delivers trusted OPW quality and proven technology at the lowest cost of ownership. The 68EZR is installed on fuel dispensing hoses and will separate when subjected to a designated pull force. Upon separation, the dual valves seat automatically, stopping the fl ow of fuel and limiting any fuel spillage, while protecting the dispensing equipment. For proper operation on high-hanging hoses, the OPW 68EZR must always be installed with a "straightening" hose, such as the OPW 66H. For low hose applications, the OPW 68EZR should be installed downstream of the retractor cable.
$ 75.00
696103N-03
  • 1A nozzle shuts off when the gas tank is full.
  • Aluminum reinforced spout bushing keeps spout tip round and acts as a captive fastener to prevent tip-end sensor damage.
  • Nozzle is equipped with a unique Flo-Stop ® device that shuts off the nozzle if it falls from the fill tank or raises above the horizontal.
  • StreamShaper ® reduces turbulence for straighter fuel flow and less splash back spillage.
  • Comes standard with smooth full grip guard.
$ 79.37
75B-008-S2F2
Manufactured with a swivel on each end to provide the ease of handling customers prefer. Inverted coaxial design reduces hose size and the steel braided, premium, abuse-resistant outer hose assures long service life and low maintenance. Available in up to 20' lengths.
$ 109.69
75B-010-S4F2
Fixed end on breakaway end, balance swivel end on dispenser end
$ 134.18
75B-085-S2S2
Fixed end on breakaway end, balance swivel end on dispenser end
$ 194.89