POMECO 100 Counterweight Hose Retractors keep excess hose off the ground and out of the way, prolonging hose life and reducing potential hazards. The POMECO 100 is a California Air Resources Board (CARB) certified Stage II component for use with single and dual hose dispensers as per Executive Order G-70-52-AM.

• Easy to Use - Counterweights are precisely matched to each hose configuration to ensure that a minimal pulling force is needed throughout hose extension.
• Easy to Maintain - The 100 has just two moving parts, ensuring a long service life with a minimum of maintenance.
• Multiple Hose Configurations - The 100 is available in a multitude of configurations to meet virtually any conventional or vapor recovery hose/nozzle configuration.
Models are also available for air and water hose applications to keep hoses clear of vehicles when not in use.

POMECO 100 Counterweight Hose Retractors keep excess hose off the ground and out of the way, prolonging hose life and reducing potential hazards. The POMECO 100 is a California Air Resources Board (CARB) certified Stage II component for use with single and dual hose dispensers as per Executive Order G-70-52-AM.

POMECO 102 Spring Balance Single Hose Retractors keep excess hose off the ground and out of the way, prolonging hose life and reducing potential hazards. The POMECO 102 is a California Air Resources Board (CARB) certified Stage II component for use with single and dual hose dispensers as per Executive Order G-70-52-AM.

• Easy to Use - The spring-loaded reel and stretch-resistant cable provide smooth and steady tension throughout hose extension and return.
• Easy to Maintain - The removable sideplate provides full access to the mechanism for easy tension adjustment and unit maintenance. A convenient safety thumb screw is provided to lock the reel in place during tension adjustment.
• Field Adjustable for Various Hose, Nozzle, Swivel, Breakaway Combinations - No need for upgrading components if a breakaway or swivel is added to the hose assembly. Simply change the tension setting on the spring-loaded hose reel.
• Multiple Mounting Options - The POMECO 102 retractor housing is tapped on the top for bolting to overhead crossbars, and on the side for mounting to vertical posts. The 102 is available as a retractor kit (including post, retractor and mounting hardware) or as separate components. Models are also available for aboveground storage tank (AST) applications. AST models include a 44'' (112 cm) post with a freestanding base.

POMECO 102 Spring Balance MPD Hose Retractors keep excess hose off the ground and out of the way, prolonging hose life and preventing extra length hoses from cluttering the island. The 102 MPD hose retractors are especially well-suited for use on Multiple Product Dispensers (MPD) with Stage II Vapor Recovery hose/nozzle assemblies. The POMECO 102 is a California Air Resources Board (CARB) certified Stage II component for use with MPDs as per Executive Order G-70-52-AM.

• Easy to Install - Each model number designates a custom designed retractor package that mounts in the canopy of a particular manufacturer’s MPD. Packages are shipped complete with the appropriate number of retractors and all the necessary mounting hardware for a clean, professional installation.
• Easy to Use - The spring-loaded reels and stretch-resistant cables provide smooth and steady tension throughout hose extension and return.
• Easy to Maintain - The removable sideplate provides full access to the mechanism for easy tension adjustment and unit maintenance. A convenient safety thumb screw is provided on each retractor to lock the reel in place during tension adjustment.

The 611 Hose Hanger is the proper way to cradle a hose while suspended from a hose retriever. The Hose Hanger supports the bend radius, protecting the hose from kinking.

• Durable construction
• Economical
• Extends life of the hose

The OPW 66V Series breakaways are designed and rigorously tested for use in today's fuels. Installed on fuel dispensing hoses, they will separate at the designed pull force, reducing expensive damage to the dispenser and piping system. Internal dual valves close automatically during separation, stopping the flow of fuel from both the dispenser and the separated hose, reducing environmental and health risks of potential spilled fuel.

• UL and ULC listed for use in gasoline, diesel, and up to 10% ethanol blends. See specific listings.
• Prevents costly damage to dispensers – Pulls apart at less the designed pull force during drive-offs.
• Certainty of operation – Designed for single use, so you know it is replaced instead of re-assembled.
• Prevents hazardous and costly clean up – Unique double poppet design closes leak path from both dispenser and separated hose side.

The OPW 66V Series breakaways are designed and rigorously tested for use in today’s fuels. Installed on fuel dispensing hoses, they will separate at the designed pull force, reducing expensive damage to the dispenser and piping system. Internal dual valves close automatically during separation, stopping the flow of fuel from both the dispenser and the separated hose, reducing environmental and health risks of potential spilled fuel.

• UL and ULC listed for use in gasoline, diesel, and up to 10% ethanol blends. See specific listings.
• Prevents costly damage to dispensers – Pulls apart at less the designed pull force during drive-offs.
• Certainty of operation – Designed for single use, so you know it is replaced instead of re-assembled.
• Prevents hazardous and costly clean up – Unique double poppet design closes leak path from both dispenser and separated hose side.

The OPW 66CAS Dual Poppeted, Dry Reconnect Inverted Breakaway is designed to close off the liquid path and the vapor path in the event of a drive-away. Engineered to separate at maximum of 300 pounds of axial pull force, the OPW 66CAS Breakaway is also designed to handle line shock better then a single use breakaway, while protecting your dispensing system from catastrophic damage. The OPW 66CAS is developed for use with inverted coaxial metric hoses and designed to meet today's demanding standards.

For more than a decade, the 66CLP has earned the reputation as the industry standard in preventing fuel vapors from escaping during a separation incident on balance systems. Its proven design minimizes downtime and allows all hose points to be put back in service as quickly and easily as possible after a separation event. The OPW 66CLP is also approved for VST Phase II Enhanced Vapor Recovery Systems.

• UL listed for use in gasoline, diesel and up to 10% ethanol blends
• Separates at 350 pounds of axial force
• Push-back reconnect style
• Durable, lightweight construction
• Minimal pressure drop

66H Series Hoses are Third-Party approved, steel reinforced hardwall flexible to -40°F. 3/4 inch inside diameter with 3/4 inch male NPT chrome crimped ends. Compatible with fuel blends up to E-15 & B-20. Maximum working pressure 50PSI. Also available in Low Permeation per Third-Party approval.