HANGING HARDWARE

 Clamp 
 Hoses 

SHOWING ITEMS 37 - 48 OF 166 RESULTS
view_module view_list
241TPS-1000
The OPW 241TPS Series of swivels are designed and rigorously tested for applications where easy nozzle and hose handling is important for customer convenience. Swivels are installed in between the nozzle and the hose to provide flexibility in the system to reduce customer strain, position the nozzle properly and reduce premature hose wear.

• UL and ULC listed for use in gasoline, diesel, and up to 10% ethanol blends
• Allows for easy nozzle positioning in fill pipes – utilizing two planes of rotation
• Added protection vs. thermal and chemical degradation – Dual Seals
• 50 psi (3.45 bar) maximum pressure
$ 48.47
28R-2404
A bushing ADAPTER used on 11 series nozzles.
$ 9.76
28S-0350
A bushing ADAPTER used on 11 series nozzles.
$ 14.34
3360VR
  • Reconnectable Safe-T-Break ® for balance vapor recovery systems - coaxial hoses with fuel on the "inside", vapor return on the "outside".
  • Unique in-line latching mechanism requires less force to reconnect Safe-T-Break ® after a separation.
  • Unique vapor valve stops vapors from escaping after a drive away.
  • Separates at less than 200 lbf / 889.6 N to minimize backlash damage.
  • Patented wave spring design minimizes nuisance breaks.
$ 137.16
36S-5080
Designed for use with fuel oil nozzles (at inlet only), the OPW 36S provides 360° swivel action. The full-circle swivel reduces the physical strain of aligning the nozzle with the fillpipe.
$ 24.37
400-04XRFS
The first nozzle to receive CARB certification for ORVR compatibility. For use on central vacuum vapor recovery systems and in aboveground storage tank applications. ORVR and vapor flow controls are built into the nozzle.
$ 570.73
$ 9.00
45-5060
The OPW 45 swivel is designed for gasoline self-service applications where easy nozzle and hose handling is important for customer convenience. The 45 is installed between the nozzle and hose to reduce strain, providing flexibility so fueling hoses last longer.

• UL and ULC listed for use in gasoline, diesel, and up to 10% ethanol blends. See specific listings.
• Compact, attractive profile for a sleek, modern appearance.
• Secure design not repairable or re­buildable for certainty of operation. Every OPW 45 is factory assembled and tested.
• Better flow performance - less restriction means higher refueling speeds.
• Unique two planes of rotation for easy nozzle positioning and hose life.
• 50 psi (3.45 bar) maximum pressure.
$ 31.88
45-5075
The OPW 45 swivel is designed for gasoline self-service applications where easy nozzle and hose handling is important for customer convenience. The 45 is installed between the nozzle and hose to reduce strain, providing flexibility so fueling hoses last longer.

• UL and ULC listed for use in gasoline, diesel, and up to 10% ethanol blends. See specific listings.
• Compact, attractive profile for a sleek, modern appearance.
• Secure design not repairable or re­buildable for certainty of operation. Every OPW 45 is factory assembled and tested.
• Better flow performance - less restriction means higher refueling speeds.
• Unique two planes of rotation for easy nozzle positioning and hose life.
• 50 psi (3.45 bar) maximum pressure.
$ 61.35
5BBPS-2137
11BP Spout Replacement
$ 28.29
5BH-0115
7H Spout Kit w/ spout ring
$ 46.60
6100-4000
POMECO 100 Counterweight Hose Retractors keep excess hose off the ground and out of the way, prolonging hose life and reducing potential hazards. The POMECO 100 is a California Air Resources Board (CARB) certified Stage II component for use with single and dual hose dispensers as per Executive Order G-70-52-AM.

• Easy to Use - Counterweights are precisely matched to each hose configuration to ensure that a minimal pulling force is needed throughout hose extension.
• Easy to Maintain - The 100 has just two moving parts, ensuring a long service life with a minimum of maintenance.
• Multiple Hose Configurations - The 100 is available in a multitude of configurations to meet virtually any conventional or vapor recovery hose/nozzle configuration.
Models are also available for air and water hose applications to keep hoses clear of vehicles when not in use.
$ 387.65