Extractors


SHOWING ITEMS 13 - 21 OF 21 RESULTS
view_module view_list
233-4422
OPW 233 Series Extractor Fittings thread into 4 NPT openings on underground storage tanks. A 4" riser pipe threads into the top of the 233 for use in Stage I Vapor Recovery or to access a ball float. The 233 Extractor Fittings have threaded single-outlet connections for attaching tank vent lines or multiple outlets used to manifold tank vents or accommodate Stage II vapor return lines from dispensers. Internal threads on the 233 are designed to install a ball float or test plug in the extractor. The OPW 233 Extractor Fittings are designed for use with all OPW 53VML Ball Float Vent Valves that include an extractor cage (the OPW 233 does not include an extractor cage). The 233 Extractor incorporates either single-outlet or multiple-outlet threads. The OPW 233VP Extractor Fitting Test Plug is used on all OPW 233 Series Extractor Fittings. The 233VP incorporates an O-Ring above the threads (on the plug) to isolate the tank from the vent piping systems during a tank test.

• Duragard® Coated Cast Iron Body – Helps prevent rust and corrosion for long service life.
• ZA12 Zinc/Alloy Cage Assembly – Eases installation and removal of ball float vent valves and test plugs.
• Precision Machined Threads – Help prevent cross threading of the ball float or tank riser pipe.
• Compatible with 85% Ethanol (E85) or Methanol (M85)
$ 118.49
233-4430
OPW 233 Series Extractor Fittings thread into 4 NPT openings on underground storage tanks. A 4" riser pipe threads into the top of the 233 for use in Stage I Vapor Recovery or to access a ball float. The 233 Extractor Fittings have threaded single-outlet connections for attaching tank vent lines or multiple outlets used to manifold tank vents or accommodate Stage II vapor return lines from dispensers. Internal threads on the 233 are designed to install a ball float or test plug in the extractor. The OPW 233 Extractor Fittings are designed for use with all OPW 53VML Ball Float Vent Valves that include an extractor cage (the OPW 233 does not include an extractor cage). The 233 Extractor incorporates either single-outlet or multiple-outlet threads. The OPW 233VP Extractor Fitting Test Plug is used on all OPW 233 Series Extractor Fittings. The 233VP incorporates an O-Ring above the threads (on the plug) to isolate the tank from the vent piping systems during a tank test.

• Duragard® Coated Cast Iron Body – Helps prevent rust and corrosion for long service life.
• ZA12 Zinc/Alloy Cage Assembly – Eases installation and removal of ball float vent valves and test plugs.
• Precision Machined Threads – Help prevent cross threading of the ball float or tank riser pipe.
• Compatible with 85% Ethanol (E85) or Methanol (M85)
$ 115.86
31140011
EBW extractor vent valves are designed to fit into a 4" tank opening on an underground storage tank. Several outlet sizes are available to accommodate manifolded tank lines and Stage II vapor recovery installations.
$ 127.40
A0079-152
The Emco Wheaton A0079 Extractor Assembly consists of a cast iron extractor body and an internal "bar style" cage. This cage holds any length of A0075 Ball Float (sold separately). The A0079 may be ordered with a variety of port combinations to accommodate tank venting and Stage II vapor recovery piping. The A0079 is also available without an extractor cage for applications that do not require the
use of a ball float and is an economical alternative for direct manifold systems. The A0079 Extractor Assemblies are available with electroless nickel coating for compatibility with E85 fuels.
$ 101.63
233-4432
OPW 233 Series Extractor Fittings thread into 4 NPT openings on underground storage tanks. A 4" riser pipe threads into the top of the 233 for use in Stage I Vapor Recovery or to access a ball float. The 233 Extractor Fittings have threaded single-outlet connections for attaching tank vent lines or multiple outlets used to manifold tank vents or accommodate Stage II vapor return lines from dispensers. Internal threads on the 233 are designed to install a ball float or test plug in the extractor. The OPW 233 Extractor Fittings are designed for use with all OPW 53VML Ball Float Vent Valves that include an extractor cage (the OPW 233 does not include an extractor cage). The 233 Extractor incorporates either single-outlet or multiple-outlet threads. The OPW 233VP Extractor Fitting Test Plug is used on all OPW 233 Series Extractor Fittings. The 233VP incorporates an O-Ring above the threads (on the plug) to isolate the tank from the vent piping systems during a tank test.

• Duragard® Coated Cast Iron Body – Helps prevent rust and corrosion for long service life.
• ZA12 Zinc/Alloy Cage Assembly – Eases installation and removal of ball float vent valves and test plugs.
• Precision Machined Threads – Help prevent cross threading of the ball float or tank riser pipe.
• Compatible with 85% Ethanol (E85) or Methanol (M85)

$ 122.37
233-4433
OPW 233 Series Extractor Fittings thread into 4 NPT openings on underground storage tanks. A 4" riser pipe threads into the top of the 233 for use in Stage I Vapor Recovery or to access a ball float. The 233 Extractor Fittings have threaded single-outlet connections for attaching tank vent lines or multiple outlets used to manifold tank vents or accommodate Stage II vapor return lines from dispensers. Internal threads on the 233 are designed to install a ball float or test plug in the extractor. The OPW 233 Extractor Fittings are designed for use with all OPW 53VML Ball Float Vent Valves that include an extractor cage (the OPW 233 does not include an extractor cage). The 233 Extractor incorporates either single-outlet or multiple-outlet threads. The OPW 233VP Extractor Fitting Test Plug is used on all OPW 233 Series Extractor Fittings. The 233VP incorporates an O-Ring above the threads (on the plug) to isolate the tank from the vent piping systems during a tank test.

• Duragard® Coated Cast Iron Body – Helps prevent rust and corrosion for long service life.
• ZA12 Zinc/Alloy Cage Assembly – Eases installation and removal of ball float vent valves and test plugs.
• Precision Machined Threads – Help prevent cross threading of the ball float or tank riser pipe.
• Compatible with 85% Ethanol (E85) or Methanol (M85)
$ 122.37
32030201
The 320 foot valve extractor is designed for use with the 150 and 151 1" foot valves. This 20 lb. extractor valve provides a means to remove foot valves easily from underground storage tanks for cleaning or servicing. The 320 foot valve extractor is gasket sealed to prevent loss of prime caused by air being sucked in through the top fitting.
$ 403.20
32030202
The 320 foot valve extractor is designed for use with the 150 and 151 1½" foot valves. This 20 lb. extractor valve provides a means to remove foot valves easily from underground storage tanks for cleaning or servicing. The 320 foot valve extractor is gasket sealed to prevent loss of prime caused by air being sucked in through the top fitting.
$ 422.10
V425
Test plug for the V420/V421.
$ 149.53