Piping


SHOWING ITEMS 37 - 48 OF 123 RESULTS
view_module view_list
ELB-XP-175
Installing APT™ brand XP flexible pipe inside of a narrow-base dispenser sump has never been easier. The XP pipe clamshell tee and elbow fittings allow for an easy space-saving installation by enabling an installer to connect flexible pipe directly into a shear valve riser. This eliminates the need for extra galvanized fittings. By eliminating the galvanized fittings, you also reduce the amount of potential leak points, giving you peace of mind that your installation is secure. With the tee and elbow fittings you can complete an XP pipe installation inside of a sump in less than 16” of linear space. The stainless steel design of the fittings makes them an ideal solution for any fueling application.

•Ideal for retrofit installations where containment sump has limited space or a narrow base.
•Eliminate threaded pipe joints inside of containment space; freeing up valuable space in tight quarters.
•Solid stainless steel construction.
•E-coated clamps provide durability and corrosion resistance from gas/alcohol blends (including E85), diesel and biodiesel.
•NPT threads are compatible with locally available standard termination fittings.
•100 psi rated working pressure.
•Stainless steel fittings are biofuel approved (E85 and biodiesel).
$ 361.90
FBB-075-D
APT bulkhead boots boast an enlarged gasket area to seal against the sump wall and incorporate the proven advantages of the APT standard flexible entry boot seal. The bulkhead boot requires only a single hole to be drilled for installation, reducing labor time and cost. APT offers a complete line of sizes for " through 2" single and secondary contained pipe. The 1" through 2" sizes are also available in a ducted boot version to accommodate the use of APT DCT-400 corrugated ducting for easy retractability.

•Designed to be used with APT product piping, the bulkhead boots are also ideal for use with rigid piping and electrical conduits.
•Flexible bulkhead boots available in sizes from " through 2". Ducted bulkhead boots available in sizes from 1" through 2".
•Boot size designations correspond directly to the pipe size being used.
•Any boot for a single wall pipe can be converted to a boot for a double wall pipe by simply removing the insert in the pipe opening.
•Bulkhead boots can be serviced from inside the sump, eliminating the need for sump excavation.
•Made from oil- and gasoline-resistant nitrile rubber.
$ 75.60
FBB-150-SC
APT bulkhead boots boast an enlarged gasket area to seal against the sump wall and incorporate the proven advantages of the APT standard flexible entry boot seal. The bulkhead boot requires only a single hole to be drilled for installation, reducing labor time and cost. APT offers a complete line of sizes for " through 2" single and secondary contained pipe. The 1" through 2" sizes are also available in a ducted boot version to accommodate the use of APT DCT-400 corrugated ducting for easy retractability.

•Designed to be used with APT product piping, the bulkhead boots are also ideal for use with rigid piping and electrical conduits.
•Flexible bulkhead boots available in sizes from " through 2". Ducted bulkhead boots available in sizes from 1" through 2".
•Boot size designations correspond directly to the pipe size being used.
•Any boot for a single wall pipe can be converted to a boot for a double wall pipe by simply removing the insert in the pipe opening.
•Bulkhead boots can be serviced from inside the sump, eliminating the need for sump excavation.
•Made from oil- and gasoline-resistant nitrile rubber.
$ 93.10
FDB-100-D
The APT flexible double entry boot allows two pipes or conduits to go through a single sump entry boot opening. The APT boot comes in two different styles, the flexible double boot for non-ducted applications and the ducted double boot when using APT DCT-400 corrugated piping. Double entry boots accommodate " and 1" pipe sizes or a combination of the two.

•Designed to be used with APT product piping, the entry boots are also ideal for use with rigid piping and electrical conduits.
•Flexible double entry boots are ideal for generator, fuel oil return and feed line applications.
•Boot can be serviced from inside the sump so there is no need to break concrete.
•Made from oil- and gasoline-resistant nitrile rubber.
•Allows two pipes to go through one boot for easier installation.
•Combination of two different pipe diameters through one boot can be easily converted by simply removing the insert in the pipe opening.
$ 123.20
FEB-050-D
APT flexible entry boots are two-piece boots that double the sealing power of your entry boots. Stainless steel studs and corrosion resistant nuts and backing rings make for the highest quality entry boot. Franklin Fueling Systems offers a complete line of sizes for single and secondary containment pipe. Also available in a ducted boot version to accommodate the use of APT DCT-400 corrugated ducting for easy retractability.

•Designed to be used with APT product piping, the entry boots are also ideal for use with rigid piping and electrical conduits.
•Flexible entry boots available in sizes from " through 4".
•Ducted entry boots available in sizes from 1" through 2". •APT offers these ducted entry boots in an air testable version for easy testing of the 4" corrugated ducting.
•Boot size designations correspond directly to the pipe size being used.
•Any boot for a single wall pipe can be converted to a boot for a double wall pipe by simply removing the insert in the pipe opening.
•Entry boot can be serviced from inside the sump, eliminating the need for sump excavation.
•Made from oil- and gasoline-resistant nitrile rubber.
•Will work on round sumps of 36" or larger diameter.
$ 60.90
FEB-050-SC
APT flexible entry boots are two-piece boots that double the sealing power of your entry boots. Stainless steel studs and corrosion resistant nuts and backing rings make for the highest quality entry boot. Franklin Fueling Systems offers a complete line of sizes for single and secondary containment pipe. Also available in a ducted boot version to accommodate the use of APT DCT-400 corrugated ducting for easy retractability.

•Designed to be used with APT product piping, the entry boots are also ideal for use with rigid piping and electrical conduits.
•Flexible entry boots available in sizes from " through 4".
•Ducted entry boots available in sizes from 1" through 2". •APT offers these ducted entry boots in an air testable version for easy testing of the 4" corrugated ducting.
•Boot size designations correspond directly to the pipe size being used.
•Any boot for a single wall pipe can be converted to a boot for a double wall pipe by simply removing the insert in the pipe opening.
•Entry boot can be serviced from inside the sump, eliminating the need for sump excavation.
•Made from oil- and gasoline-resistant nitrile rubber.
•Will work on round sumps of 36" or larger diameter.
$ 58.80
FEB-075-D
APT flexible entry boots are two-piece boots that double the sealing power of your entry boots. Stainless steel studs and corrosion resistant nuts and backing rings make for the highest quality entry boot. Franklin Fueling Systems offers a complete line of sizes for single and secondary containment pipe. Also available in a ducted boot version to accommodate the use of APT DCT-400 corrugated ducting for easy retractability.

•Designed to be used with APT product piping, the entry boots are also ideal for use with rigid piping and electrical conduits.
•Flexible entry boots available in sizes from " through 4".
•Ducted entry boots available in sizes from 1" through 2". •APT offers these ducted entry boots in an air testable version for easy testing of the 4" corrugated ducting.
•Boot size designations correspond directly to the pipe size being used.
•Any boot for a single wall pipe can be converted to a boot for a double wall pipe by simply removing the insert in the pipe opening.
•Entry boot can be serviced from inside the sump, eliminating the need for sump excavation.
•Made from oil- and gasoline-resistant nitrile rubber.
•Will work on round sumps of 36" or larger diameter.
$ 60.90
FEB-075-SC
APT flexible entry boots are two-piece boots that double the sealing power of your entry boots. Stainless steel studs and corrosion resistant nuts and backing rings make for the highest quality entry boot. Franklin Fueling Systems offers a complete line of sizes for single and secondary containment pipe. Also available in a ducted boot version to accommodate the use of APT DCT-400 corrugated ducting for easy retractability.

•Designed to be used with APT product piping, the entry boots are also ideal for use with rigid piping and electrical conduits.
•Flexible entry boots available in sizes from " through 4".
•Ducted entry boots available in sizes from 1" through 2". •APT offers these ducted entry boots in an air testable version for easy testing of the 4" corrugated ducting.
•Boot size designations correspond directly to the pipe size being used.
•Any boot for a single wall pipe can be converted to a boot for a double wall pipe by simply removing the insert in the pipe opening.
•Entry boot can be serviced from inside the sump, eliminating the need for sump excavation.
•Made from oil- and gasoline-resistant nitrile rubber.
•Will work on round sumps of 36" or larger diameter.
$ 63.00
FEB-100-D
APT flexible entry boots are two-piece boots that double the sealing power of your entry boots. Stainless steel studs and corrosion resistant nuts and backing rings make for the highest quality entry boot. Franklin Fueling Systems offers a complete line of sizes for single and secondary containment pipe. Also available in a ducted boot version to accommodate the use of APT DCT-400 corrugated ducting for easy retractability.

•Designed to be used with APT product piping, the entry boots are also ideal for use with rigid piping and electrical conduits.
•Flexible entry boots available in sizes from " through 4".
•Ducted entry boots available in sizes from 1" through 2". •APT offers these ducted entry boots in an air testable version for easy testing of the 4" corrugated ducting.
•Boot size designations correspond directly to the pipe size being used.
•Any boot for a single wall pipe can be converted to a boot for a double wall pipe by simply removing the insert in the pipe opening.
•Entry boot can be serviced from inside the sump, eliminating the need for sump excavation.
•Made from oil- and gasoline-resistant nitrile rubber.
•Will work on round sumps of 36" or larger diameter.
$ 58.80
FEB-100-SC
APT flexible entry boots are two-piece boots that double the sealing power of your entry boots. Stainless steel studs and corrosion resistant nuts and backing rings make for the highest quality entry boot. Franklin Fueling Systems offers a complete line of sizes for single and secondary containment pipe. Also available in a ducted boot version to accommodate the use of APT DCT-400 corrugated ducting for easy retractability.

•Designed to be used with APT product piping, the entry boots are also ideal for use with rigid piping and electrical conduits.
•Flexible entry boots available in sizes from " through 4".
•Ducted entry boots available in sizes from 1" through 2". •APT offers these ducted entry boots in an air testable version for easy testing of the 4" corrugated ducting.
•Boot size designations correspond directly to the pipe size being used.
•Any boot for a single wall pipe can be converted to a boot for a double wall pipe by simply removing the insert in the pipe opening.
•Entry boot can be serviced from inside the sump, eliminating the need for sump excavation.
•Made from oil- and gasoline-resistant nitrile rubber.
•Will work on round sumps of 36" or larger diameter.
$ 58.80
FEB-150-MD
APT flexible entry boots are two-piece boots that double the sealing power of your entry boots. Stainless steel studs and corrosion resistant nuts and backing rings make for the highest quality entry boot. Franklin Fueling Systems offers a complete line of sizes for single and secondary containment pipe. Also available in a ducted boot version to accommodate the use of APT DCT-400 corrugated ducting for easy retractability.

•Designed to be used with APT product piping, the entry boots are also ideal for use with rigid piping and electrical conduits.
•Flexible entry boots available in sizes from " through 4".
•Ducted entry boots available in sizes from 1" through 2". •APT offers these ducted entry boots in an air testable version for easy testing of the 4" corrugated ducting.
•Boot size designations correspond directly to the pipe size being used.
•Any boot for a single wall pipe can be converted to a boot for a double wall pipe by simply removing the insert in the pipe opening.
•Entry boot can be serviced from inside the sump, eliminating the need for sump excavation.
•Made from oil- and gasoline-resistant nitrile rubber.
•Will work on round sumps of 36" or larger diameter.
$ 123.90
FEB-150-SC
APT flexible entry boots are two-piece boots that double the sealing power of your entry boots. Stainless steel studs and corrosion resistant nuts and backing rings make for the highest quality entry boot. Franklin Fueling Systems offers a complete line of sizes for single and secondary containment pipe. Also available in a ducted boot version to accommodate the use of APT DCT-400 corrugated ducting for easy retractability.

•Designed to be used with APT product piping, the entry boots are also ideal for use with rigid piping and electrical conduits.
•Flexible entry boots available in sizes from " through 4".
•Ducted entry boots available in sizes from 1" through 2". •APT offers these ducted entry boots in an air testable version for easy testing of the 4" corrugated ducting.
•Boot size designations correspond directly to the pipe size being used.
•Any boot for a single wall pipe can be converted to a boot for a double wall pipe by simply removing the insert in the pipe opening.
•Entry boot can be serviced from inside the sump, eliminating the need for sump excavation.
•Made from oil- and gasoline-resistant nitrile rubber.
•Will work on round sumps of 36" or larger diameter.
$ 80.50