Installed on the tank riser pipe to make up for adjustment in the grade level due to tank settlement. Threads in between the riser pipe and the fill adaptor. Two heights are available.

Used as a cover for the extractor/float vent valve riser pipe. Installed at grade level, normally inside a manhole.

A 4" diameter corrugated flexible conduit used to provide access to and permit the future replacement of the Flex piping if desired. This corrugated pipe is strong enough to withstand H-20 loading requirements when properly buried and thick enough to minimize damage from shipping and jobsite handling. Access pipe can accommodate the 3/4", 1", 1-1/2", 2" and 3" FlexWorks supply pipe.

• Crush and puncture-resistant
• Semi-smooth liner facilitates ease of installation
• Saves you time and money
• No buried joints

Bostik 1100, 10.3 ounce tube (white)

Bypass tube, 30" length

• Increased Pipe Flexibility – the force required to bend the pipe has been reduced to facilitate piping layout. This makes installation quicker and easier, especially in cold weather.
• Pipe Weight – has been reduced to facilitate shipping and handling
• Pipe Memory – Inherent pipe memory has been reduced significantly to facilitate connection of pipes inside sumps
• Redesigned Profile – enhanced leak detection performance
• Enhanced Kynar Pipe Liner – fluoropolymer chemical structure makes it dense and permeation resistant

• Increased Pipe Flexibility – the force required to bend the pipe has been reduced to facilitate piping layout. This makes installation quicker and easier, especially in cold weather.
• Pipe Weight – has been reduced to facilitate shipping and handling
• Pipe Memory – Inherent pipe memory has been reduced significantly to facilitate connection of pipes inside sumps
• Redesigned Profile – enhanced leak detection performance
• Enhanced Kynar Pipe Liner – fluoropolymer chemical structure makes it dense and permeation resistant

• Increased Pipe Flexibility – the force required to bend the pipe has been reduced to facilitate piping layout. This makes installation quicker and easier, especially in cold weather.
• Pipe Weight – has been reduced to facilitate shipping and handling
• Pipe Memory – Inherent pipe memory has been reduced significantly to facilitate connection of pipes inside sumps
• Redesigned Profile – enhanced leak detection performance
• Enhanced Kynar Pipe Liner – fluoropolymer chemical structure makes it dense and permeation resistant

Flexible ducting connector with clamps

The APT flexible double entry boot allows two pipes or conduits to go through a single sump entry boot opening. The APT boot comes in two different styles, the flexible double boot for non-ducted applications and the ducted double boot when using APT DCT-400 corrugated piping. Double entry boots accommodate ¾" and 1" pipe sizes or a combination of the two.

•Designed to be used with APT product piping, the entry boots are also ideal for use with rigid piping and electrical conduits.
•Flexible double entry boots are ideal for generator, fuel oil return and feed line applications.
•Boot can be serviced from inside the sump so there is no need to break concrete.
•Made from oil- and gasoline-resistant nitrile rubber.
•Allows two pipes to go through one boot for easier installation.
•Combination of two different pipe diameters through one boot can be easily converted by simply removing the insert in the pipe opening.